Making Colloidal Silver

Colloidal silver is a product with a potent effect againstwater. The generation of the silver solution is an instant
pathogenic micro-organisms. It is used as a healingprocess. Since silver is a light-sensitive metal, the entire
agent, antiseptic, and a deodorant. For massprocess is conducted in a dimly lit room, preferably a
production, there are commercially availabledark room. Once the process is complete, the wires
generators, however on a smaller scale, they can beare cleaned with soft paper towels to keep them
created by an individual with easily available products.Ascratch free. Care is taken to see that the deposits of
drinkable form of the colloidal solution is made bysilver oxide are removed after each use.Evaluation of
diffusing the silver ions in water by passing a dcthe purity of the prepared colloidal solution can be done
electric current through two silver electrodes dippedby examining the back-scatter of a laser beam. The
inside water. The simplest requirements include abeam is directed to pass through the solution and
battery project case with battery holders and clip,viewed at an angle of 15o. This is the Tyndall or the
standard 4 mm banana plugs used on most testingRaleigh effect. However, it is considered a less reliable
equipment, matching sockets, an LED to indicate themethod compared to microbiological tests. The
current flow, and a resistor to allow the desired current.preparation is stored in non-conductive, dark, opaque,
The resistors can range from 1K to 10K, allowing aplastic containers and never in metal
current of 1mA to 10mA. The most importantcontainers.Precautions for making silver colloid include
component is the 3mm silver wire used to generatethe use of distilled water and fine-quality silver
high-quality silver in the suspension. This is free fromelectrodes/wires. Tap water is suitable for topical
impurities, unlike the sterling silver.The apparatus issprays or for use in plants. Saline is added to improve
assembled completely and tested for the flow ofthe conductivity, however it is advisable to refrain from
proper current. The silver wires are kept immersed inusing salt as it affects the quality.